Instructions for use

• The appliance must be installed at least 1 metre away from any flammable object (on either side of the appliance) and at least 2 metres away (at the rear of the appliance). It must also be kept at least 2 meters away from water or any source of moisture.

• The product should be placed on a stable, horizontal, non-flammable surface capable of withstanding high temperatures, or on a FORGE ADOUR branded trolley/support.
• To avoid the risk of fire, do not connect the unit to an extension cord or multiple socket.
• Caution: During use, the unit and its accessible parts become hot. Take care not to touch the heating elements. Children under 8 years of age should be kept at a distance unless they are under continuous supervision.
• Do not use external programming systems (e.g. timers).
• Never move the unit during operation.
• Set the temperature control knob to "Off" and unplug the power cord after each use or for cleaning.
• Accessible parts may be hot: keep children away.

• Make sure the control knob is in the "OFF" position before connecting the appliance.
• Turn the control knob clockwise to the desired cooking temperature.
• The blue LED lights up and the appliance begins to heat up.
• For 1st use, we recommend running the appliance for 10 minutes without load (a slight odor may be released for a few moments).
• Once the desired cooking temperature has been reached, the blue LED goes out and the unit stops heating.
• The appliance will start heating again when the cooking temperature falls below the set temperature.
• You can set the temperature from 0 to 300°C throughout the cooking process.
• Preheat the plancha to 200°C and regulate the temperature according to how your food is cooking.

The appliance must be installed at least 1 metre away from any flammable object (on either side of the appliance) and at least 2 metres away (at the rear of the appliance). It must also be kept at least 2 meters away from water or any source of moisture.

• The product must be placed on a stable, horizontal, non-flammable surface capable of withstanding high temperatures, or on a FORGE ADOUR branded trolley/support.
• To avoid the risk of fire, do not connect the appliance to an extension cord or multiple socket.

• Do not use external programming systems (e.g. timers).
• Never move the unit during operation.
• Set the temperature control knob to "Off" and unplug the power cord after each use or for cleaning.

• Control thermostat scale: 300°C
• Safety thermostat: 350°C
• If an electrical malfunction occurs, the unit will stop heating at 350°C and automatically cut off the power supply.
• Please disconnect the power cable immediately and consult your distributor.

• The grease tray should be emptied and cleaned after each use, when the plancha is cold. The grease tray must be handled when the griddle is cold.
• There are two ways to clean the griddle:
• • Hot: use your cooking spatula and stainless steel ball to remove cooking residues. Pour water directly onto the griddle and rub with your stainless steel ball to release excess water into your grease tray. Use the spatula to handle the stainless steel ball to avoid burning yourself.
  • Cold: use your damp sponge with the cleaning stone or Plancha Net product, rinse with your sponge and finish with a microfiber square to restore your plancha's shine.